News & Events
![](../news/enjoy_summer_holiday.png)
Summer Vacation
2024 August, 5th-23th
Mecatronic will remain closed from August 5th to 23th.
For any urgent matter, please do not hesitate to contact us at the email address
support@mecatronicitalia.com
We wish you a nice and restful vacation!!
Mecatronic Staff
posted on 05/08/2024
![](../news/SPS_PARMA_24.png)
SPS Italia 2024
FROM 28 to 30 in MAY 2024
SPS Italia is the fair for intelligent, digital and sustainable industry. Born in 2011, the Fair is the annual event to discuss the most challenging issues of industrial automation.
In Parma, from 28 to 30 May 2024, with six pavilions, SPS Italia presents itself again as a point of reference for discovering the enabling technologies for the factory, learning about new trends, discussing the green and digital transformation of manufacturing.
The District 4.0 area completes the exhibition offer.
MECATRONIC SRL IS WAITING FOR YOU AT FIERE DI PARMA IN HALL 6 STAND J006 FROM 28 TO 30 MAY 2024
posted on 05/03/2024
![](../news/alphajet_evo.png)
Alphajet EVO
Supply of spare parts
Due to the unavailability of electronic parts following the Covid 19 pandemic, we inform you that starting from 2028 the supplier Koenig & Bauer Coding GmbH will cease the supply of spare parts and repairs for Alphajet Evo equipment, machines which have been discontinued at the end of 2023 for the same reason.
We inform you that we have taken steps to procure the quantity of spare parts available from the supplier in such a way as to guarantee maintenance and repairs until these parts run out.
We remain at your complete disposal for any clarification or further requirement
Technical Assistance Service
posted on 14/01/2024
![](../news/discontinued.jpg)
Discontinued Products Support 2020/2026
spare parts availability notice
Since a lot of time has passed since the end of production of some of our machines, starting from the next few years it will no longer be possible for us to guarantee availability of spare parts.
In detail, the end of support forecast for the following machines:
2023
- FiberStrip 7035
- UniStrip 2500
- MegaStrip 9600
2024
- PreFeeder 3500
- PreFeeder 4600
- PreFeeder 4700
2025
- CableCoiler 1400
- CompactStrip 9200 RX
- OmniStrip 9450
- PowerStrip 9500
- PreFeeder 4300
- PreFeeder 4650
- PreFeeder 4800
- WireStacker 3100
2026
- EcoStrip 9300
- EcoStrip 9320
For any further information and/or problems do not hesitate to contact our Customer Support.
< br>In any case we will try to satisfy your requests
posted on 12/12/2023
![](../news/ACO07_news.png)
ACO 07
End of Production
The crimp-force monitoring system ACO 07 will be withdrawn from sale at the end of 2023.
Service support will be provided until the end of 2025.
ACO 07 will be completely replaced by ACO 08 from January 1, 2024.
ACO 08 was already introduced in all markets.
posted on 12/12/2023
![](../news/productronica.png)
PRODUCTRONICA 2023 - Messe München
November 14-17th - Munich
As world's leading trade fair, productronica presents the entire range of technologies and solutions for electronics manufacturing and provides insights into the latest trends in practice-oriented forums and live demonstrations.
Every two years the world of electronic production meets in Munich.
Exhibitors and visitors from all over the world make Productronica the most important meeting place and source of inspiration for the sector.
MECATRONIC srl IS WAITING FOR YOU AT Messe Munchen in HALL B4 STAND 264 FROM 14 TO 17 NOVEMBER 2023
Request your Voucher
posted on 12/10/2023
![](../news/sps_nuremberg.png)
Komax Events
Participate to the Komax Group events in November
This autumn the Komax Group will present innovations and comprehensive services at three events simultaneously: in Munich, Nuremberg and Grafenau.
At each event, intelligent solutions will be presented to optimize and add value to your manufacturing processes, each tailored to industry-specific topics of interest.
Get your Ticket
"
posted on 11/10/2023
![](../news/END_cirris_CR.png)
CIRRIS CR
End of Sale 2023 announce
Mecatronic will stop selling the CIRRIS CR tester at the end of the year 2023 but we will continue to support it with spare parts and technical assistance for 5 more years.
posted on 02/10/2023
![](../news/alphajet_tempo.png)
Alphajet Tempo
Product discontinued assistance
Due to the unavailability of electronic parts following the Covid 19 pandemic, starting from the end of April 2028 the supplier Koenig & Bauer Coding GmbH will cease the supply of spare parts and repairs for Alphajet Tempo equipment, machines that will go out of production for the same reason in May 2023.
Mecatronic will procure the quantity of spare parts available from the supplier in order to guarantee maintenance and repairs until these parts run out.
Mecatronic Technical Assistance Service
posted on 19/04/2023
![](../news/excellent.jpg)
To be Excellent 2023
Schleuniger Partner
For the fifth consecutive year Mecatronic is proud to announce the receipt of
Schleuniger Partner "To be Excellent"
sincere thanks to all those who enabled us to achieve this goal again.
posted on 08/04/2023
![](../news/A6144626_PAL4000_webgr.jpg)
New Service of Crimping Press Analysis
Available upon reservation
From now on, Mecatronic is able to offer you a calibration service for crimping presses provided by one of the most efficient and innovative tools for the maintenance and capability.
New and unique features like colour touch display, integrated memory and USB interfaces in combination with our proven quality make the PAL 4000 to an essential tool for quality assurance in the wire harness production. Due to the modern touch screen an easy and comfortable operation as well as an immediate presentation of the measuring results directly at the device is possible.
At present, the service is only available for 135.780mm crimping presses
Contact us for info and bookings
posted on 08/09/2020
![](../news/blueye.jpg)
Glance with safety
Print image monitoring with code-M camera
Expansion of the production line with a camera control system can also be simply achieved with an efficient application management of integrated camera solutions.
The successful combination of Metronic Alphajet Printers, the optional code-M Camera and its dedicated software optimise production
processes.
With the integrated camera solution, which is a notch above the rest thanks to its simple operation and absolute accuracy, each marking is automatically verified and thus gives you the option of fast reaction times for the identification of quality changes of the marking.
The direct connection between camera and printer offers you a number of advantages:
- Attractive price, since additional computers become unnecessary
- Increase in turnover by avoiding scrap parts
- Easy operation on the printer display
- Error avoidance through coordinated interfaces
- Increased output through high production reliability
- Cost savings as compared to previous test methods
- Relief for employees by high production reliability
![](http://www.mecatronicitalia.com/news/mondocamera.png)
posted on 08/09/2020
![](../news/industria_4-0_small.jpg)
Industry 4.0
Italian Customers Only
This is the ideal time to invest in your new production process.
Current tax incentives, in fact, make significant economic benefits possible when purchasing and renewing "interconnected" machinery.
For all the information and inquiries, please do not hesitate to contact us, we will be able to find the right solution for you.
posted on 08/09/2020
need Help?
if you need to obtain Technical information and Technical Assistance or Commercial information and requests for offers...